Maximize your curb appeal with a concrete walkway/sidewalk. You can choose from many different designs, finishes and colours to suit your style. Like all concrete structures, a concrete sidewalk/walkway will resist wear and tear and provide a functional inviting entrance to your home.
As every project is unique according to the customer’s requests, we will provide a tailored solution for each project. However, constructing sidewalk/walkway includes the following stages:
Our team will set-up a meeting with you to understand your design choices and requirements. We will also suggest suitable concrete type, pattern, colour, finish and shape.
A combination of manual labour and specialized machinery is used to clear the work area and remove the excavated material from the site.
The next process is formwork. As per the selected design, a temporary mould is created into which fresh concrete is poured and set.
The next step is adding clear gravel. This will provide the proper base for drainage under the concrete. The gravel is then graded and compacted according to the elevation.
Reinforcing steel and/or fibre mesh are imbedded into the freshly poured concrete to add strength and eliminate any concrete separation.
Depending on the project, concrete is poured into the prepared area with the help of wheelbarrow or concrete truck. The fresh concrete is simultaneously leveled and then screeded by drawing a straight-edged tool in a back and forth motion across the surface of the wet concrete.
The finishing process and techniques varies according to the type of desired finish. You can choose:
Regular White Concrete: It is ideal for concrete driveways, patios, walkways, slabs, floors and many other concrete structures. It is the most common and widely used type of concrete and it is the favourite choice. Regular concrete can have a few different finishes, including:
- Broom finish where fine lines are created on the top layer to create a non-slippery surface.
- Hand spin finish is created by hand textured troweling.
- Smooth finish where the top layer is perfectly smoothened using a trowel or similar tool to create a clean, modern-looking surface.
Colour Stamped: A decorative finish commonly used for driveways, patios, sidewalks, pool decks and more. Stamped finish is patterned and/or textured to resemble slate and flagstone. Various colours and patterns can be used.
Exposed Aggregate: To create the exposed aggregate look, the top layer of cement is removed to reveal the small pebbles in the concrete. It is a non-slippery durable finish, available in many colours.
Custom Designed: There are endless possibilities of styles and colours when working with concrete. Whatever style or finish you may choose, it does not compromise the strength and durability of a concrete surface. Contact our team to discuss your style preference and we will work with you to create a custom design for you.
The next step is to remove and clear away all the formwork.
After the concrete has started to harden and cure, cuts are made using a saw to create control joints or they can be hand tooled. These joints act as guides to help cracking follow along the joints and relieve further stresses. This aids in minimizing cracking from developing by compensating for the changes that concrete may go through because of temperature fluctuations and the shrinkage during the curing process, and /or any substrate movements.
Pressure washing is required before sealing the concrete.
Once all the major construction steps are complete, our team will properly clear the site of any debris and also wash the required areas.
It is important to use the correct type of sealer based on the concrete finish and its intended use. Concrete sealers help provide protection to the concrete surface. Not every sealer looks or performs the same. There are two general paths to concrete sealers. Penetrating sealers include both repellants and hardeners. Both are products that penetrate into the concrete, thus making the surface less porous. The benefits of penetrating treatments are that these products soak into the concrete. This provides protection to exterior concrete from the freeze and thaw cycles (environmental elements) and from certain chemicals. The other path to protection is topical sealers. Unlike penetrating sealers, they do not penetrate deeply into the capillary pores of concrete. Proper sealing methods are required for successful results.